Original Wort Concentration and Alcohol Content in Beer
Wort concentration generally refers to the proportion of wort formed by the malt (the term wort in beer) after the sugar process. Generally, the specific gravity of water is recorded as 1.000; if the malt in wort is enzymatically hydrolyzed to produce a lot of maltose or some other fermentable sugar or non-fermentable sugar, this wort will be heavier than water, the specific gravity will be greater than 1. The wort concentration seen on the general domestic beer trademark is often marked as xxx ° or xxx ° P, which is calculated like this: (the specific gravity of wort -1) × 1000/4, such as the specific gravity of wort is 1.048, then the final calculated wort concentration is 12 ° P, which is the degree of wort you see on the wine label.
Alcohol content is the alcohol content in the body after the final fermentation; there are two marking methods; the more common is the volume percentage: %abv or some are also labeled as alc/vol. Another uncommon one is a mass percentage: %abw.
Generally, the higher the initial wort concentration, the higher the alcohol content obtained after the final fermentation. There is a rough conversion relationship abh = (initial wort concentration – wort concentration at the end of fermentation) ×0.524. Of course, this is only a rough estimate, which is more suitable for homebrewing.
The Simplified Explanation
The original wort concentration refers to the sugar content of the wort. Malt, rice, starch, etc., are processed in the sugar chemical section (European beer only uses malt), make wort, enter the fermentation tank and add yeast, and ferment into beer. is the percentage of concentration (by weight) of the wort extract, marked by °P.
The usual number of beer degrees refers to the concentration of malt, not the alcohol. The main beer degrees are 18, 16, 14, 12, 11, 10, and 8. There are fewer beers above 12 °P in China, and the current popularity is mainly 11, 10, and 8 degrees. Foreign beer is mainly 12 degrees, 11 degrees; less than 10 degrees is less; there are wide varieties greater than 12 degrees, such as Bork bock beer is 16 degrees; the monastery series of double, three beers (double triple malt feeding), malt degree can reach more than 20 degrees.
The higher the wort concentration, the better the nutritional value; while the foam is delicate and long-lasting, the wine is mellow and soft, and the storage period is long. Therefore, the “original wort concentration” is a hard reference index for identifying beer.
The alcohol content is because the wort is fermented by yeast. The sugar biochemistry is synthesized into alcohol, carbon dioxide, and other ester alcohol nutrients, so there is a statement of alcohol content; alcohol accounts for the percentage of beer liquid, which is the same as the alcohol content of liquor, marked with %.
Low concentration type: wort concentration in 6 ° ~ 8 ° (Bahrain saccharometer), alcohol content of about 2%, summer can be made of cool drinks, the disadvantage is poor stability, storage time is shorter.
Medium concentration type: wort concentration in 10 ° ~ 12 °, alcohol content in 3. About 5%-4% is the main beer production variety in China.
High concentration type: wort concentration in 14 ° ~ 20 °, alcohol content of 5% ~ 10%